Pro-Series™ Maintenance Instructions


NOTE: When installing your new Pro-Series™ rubber floor system with RSG dry adhesives, you may begin the RSG Easy Care maintenance system, outlined below, immediately upon completion of your installation.

Rebound Sales Group (RSG) uses only the very best compression molded stock product made from nearly 100% recycled rubber. This product provides RSG with the best material available to our industry for our PRO-Series™ Sports flooring and PRO-Response™ products.

RSG recommends the use of Profi by Taski, exclusively, that is available at Dalco Enterprises http://www.dalcoonline.com.

RSG recommends that your floor be swept with a clean fine bristled broom or dust mop and/or damp mopped with clean water on a daily basis. When any soil buildup is noted, you may mop with a light solution of Profi and clean water, or, using a finishing buffer pad from your janitorial supplier, spray a solution of Profi and clean water followed with a buffing action to bring the Pro-Series™ floor finish to a low luster. ALWAYS FOLLOW LABEL DIRECTIONS when using Profi or any other cleaning solution.

RSG does not recommend any other cleaner for these floors and you MUST NOT USE ANY FINISHING MATERIAL such as wax or polish. These products may damage your new floor and may void your warranty.




Rebound Sales Group (RSG)
601 Campus Drive, Suite 9
New Brighton, MN 55112


Contact us via telephone or fax at: Toll Free: 1-866-5REBOUND
Fax: 651-653-4871

On the Web at: http://www.reboundsg.com
email: info@reboundsg.com

© Copyright 2004. All Rights Reserved by Rebound Sales Group