Sigaway Dry Roll Adhesives

• No odors from Sigaway dry adhesive,
• No VOCs from Sigaway dry adhesive,
• No Off-gassing from Sigaway dry adhesive,
• Solvents and formaldehyde are non-existent in Sigaway,
• SAFE for people AND it outperforms common adhesives ,
• Sigaway dry adhesive disposal is unrestricted,
• No more adhesive headaches nor explosion risks,
• Safe to use in all occupied areas,
• Your project is ready to use IMMEDIATELY with Sigaway.

Reminder: Always test each product & surface before using
these adhesives for the first time ! !

Sigaway Original [SO100025/SO50025]: This is the ultimate technology for installing floor coverings without wet adhesives. Sigaway is a full-surface, textile reinforced double sided self stick dry adhesive from the roll. Use for full surface installation of carpet over glue-down carpet, or solid sheet vinyl or tile over asbestos, VCT, new or old concrete or existing ceramic tile installations. It has limited or restricted suitability over wood, epoxy, terrazzo or rubber. It is ideal for renovation projects + + many other applications.

Siga Construction Adhesive [SO5025]: Textile re-enforced, double sided, self stick dry adhesive. Use for perimeter and seam re-enforcement under Sigaway full surface dry adhesives during carpet over carpet installation. This is often appropriate to attach temporary polyurethane space dividers during sensitive remodeling projects. When applied properly, it will not harm most painted or other stable finished surfaces and may be carefully removed without harmful residue or other damages to your existing finished surface.

Siga Expofix [SE5025/SE7025]: Textile re-enforced, pressure sensitive, self-stick adhesive system. Use for temporary perimeter installations of exhibit flooring, temporary finishes, walk-off mats and other uses when it is imperative that the substrate be preserved without residual damages. It has been used to install modular carpets where typical adhesive systems are not acceptable in an occupied space.

Siga Contact [SC5550/SC8550/SC12050]: Sigaway dry contact adhesive is a two sided film used to apply most carpet base (including Unibond™ by Lees), solid sheet vinyl seams + flash-cove and to install solid vinyl or Quartz tiles.

Siga Promont [SP2550/SP3550]: Promont adhesive is a double strength, two sided contact cement film. Uses include installation of top caps, metal and vinyl reducers on structurally sound surfaces that are free of dust, cracks, flaking paints and oil residues.

Siga Electronic [SEL100025]: Textile re-enforced, two sided, ESD conductive dry adhesive. Use for realeasable [pressure sensitive] full surface installation of ESD condusctive vinyl sheet or tile over new or existing concrete or ceramic tile. It has limited suitability when used over wood, failed epoxy or terrazzo. It is also used to install new ESD carpet over existing non-ESD direct glue carpet.

Siga Circuit [SEL4025/SEL200025]: This is a two sided, textile re-enforced, electrically conductive dry adhesive in either 1.6 inch or 8.0 inch rolls. Siga Circuit is used to electrically bridge conductive flooring that has been installed over a non-conductive Sigaway Original adhesive system.

Siga Copper Tape [SEL1220]: This product is a 1/2 inch strip of dry adhesive backed copper metal. It is used as a static bridge and to connect to ground conductive flooring installations.